Metal Grip Clamp – Full Circle High Strength Pipe Repair Clamp Graphics

Industrial Clamps

Metal Grip Clamp – Full Circle High Strength Pipe Repair Clamp

The Full-Circle High-Strength Pipe Repair Clamp is a stainless steel repair system engineered for high-pressure pipelines and permanent rehabilitation. Unlike temporary clamps, it delivers structural reinforcement and long-term sealing for water, wastewater, oil, gas, and industrial applications. With its reinforced stainless steel shell and precision-engineered gasket system, this clamp is the preferred choice for industries where leakage is not an option.

Feature of Clamps

Key Features of Metal Grip Clamp
  • Full-Circle Sealing – 360° coverage ensures secure, long-lasting repairs.
  • High-Pressure Rated – Withstands up to 40 bar, depending on diameter.
  • Heavy-Duty Stainless Steel – Available in AISI 304 or 316L for superior corrosion protection.
  • Advanced Gasket Options – NBR, EPDM, or FKM for Wide OD Tolerance – Handles out-of-round or corroded pipes Quick
  • Installation – No welding or hot work needed; can be installed under live conditions.
- Full Circle High Strength Pipe Repair Clamp

Comparision Table

Comparison with Traditional Repairs
Part No.DN (mm) OD Range (mm) Standard Length (mm) Max. Pressure (bar)
PTCL-40 40 48 – 60 200 – 300 40
PTCL-65 65 76 – 90 200 – 300 40
PTCL-80 80 88 – 114200 – 300 40
PTCL-100 100 108 – 133 200 – 300 40
PTCL-125 125133 – 159 300 – 400 25
PTCL-200 200 219 – 244 300 – 400 25
PTCL-250 250 273 – 298 300 – 400 25
PTCL-300 300 323 – 355 400 – 500 25
PTCL-350 350 355 – 406 400 – 50016
PTCL-400 400 406 – 457 400 – 600 16
PTCL-500 500508 – 560 400 – 600 16
PTCL-600 600 610 – 630 400 – 600 16
PTCL-700 700 710 – 768 600 – 800 10
PTCL-800 800 813 – 870 600 – 800 10
PTCL-900 900 914 – 975 600 – 80010
PTCL-1000 1000 1016 – 1067 600 – 800 10

Additional Data

Technical Details
ParameterDetails
Size RangeDN 40 – DN 2000
Pressure RatingUp to 40 bar (size-dependent)
Body MaterialStainless Steel AISI 304 / 316L
FastenersStainless steel A2/A4 or galvanized, anti-seize coated
Gasket OptionsNBR (oil, gas), EPDM (water, wastewater), FKM (chemicals, high temp)
Temperature Range-20°C to +110°C (EPDM) / up to +200°C (FKM)
Pipe CompatibilitySteel, ductile iron, asbestos cement, GRP, PVC (with stiffener)
Lengths Available200 mm – 1000 mm (custom lengths available)

Additional Data

Size Chart – Pressure vs. Diameter
DN (mm) OD Range (mm) Standard Length (mm) Max Pressure (bar)
40 – 100 48 – 114 200 – 300 40
125 – 300 140 – 323 300 – 40025
350 – 600 355 – 630 400 – 600 16
700 – 1000 710 – 1016 600 – 800 10
1200 – 2000 1200 – 2000 800 – 1000 6

Additional data

Material Selection Guide

AISI 304 Stainless Steel

For freshwater, general applications, municipal networks.

AISI 316L Stainless Steel

For marine, offshore, and chemical plants (high chloride
resistance).

EPDM

Potable water, wastewater, firewater.

NBR

Oil, fuel, hydrocarbons.

FKM (Viton)

High temperature or chemical service lines.

Guidance

Installation Guide for Metal Clamps
1
Clean the Pipe Surface
Remove rust, debris, and dirt.
2
Position the Clamp
Open and place around defect area.
3
Align Gasket Lips
Ensure proper seating on the pipe.
4
Tighten Bolts Sequentially
Use cross-pattern tightening.
5
Torque Check
Confirm final torque matches datasheet.
6
Leak Test
Verify sealing before restoring service.

Applications

Industries & Applications

1. Water & Wastewater Utilities

  • Repairing leaks in distribution mains and aging municipal water pipelines.
  • Sealing cracks in ductile iron and cast iron pipes.
  • Certified EPDM gaskets make it safe for potable water use.

2. Oil & Gas Industry

  • Emergency repair of crude oil, gas, and fuel pipelines.
  • Permanent reinforcement of high-pressure transmission lines.
  • NBR gaskets ensure compatibility with hydrocarbons.

3. Chemical & Process Industries

  • Repairing leaks in pipelines carrying acids, alkalis, and solvents.
  • Reinforcement of corroded sections in chemical plants.
  • FKM (Viton) gaskets provide chemical and high-temperature resistance.

4. Power Generation (Thermal, Nuclear & Hydro)

  • Sealing leaks in cooling water, condensate, and auxiliary lines.
  • Used in maintenance shutdowns for rapid repairs.
  • Stainless steel body prevents corrosion in continuous operation.

5. Marine & Offshore Industry

  • Repairs for seawater intake pipes, ballast systems, and offshore platforms.
  • Designed for harsh saltwater environments.
  • 316L stainless steel ensures long-term resistance to chloride attack.

6. Mining & Slurry Pipelines

  • Sealing abrasive slurry transport pipelines.
  • Reinforcement of steel or HDPE mining lines.
  • Custom clamp lengths available for large diameter systems.

7. Fire Protection Systems

  • Emergency repair of hydrant lines, sprinkler networks, and firefighting mains.
  • EPDM gaskets ensure compatibility with firewater.
  • Quick installation keeps safety systems operational.

8. Industrial Utilities & Infrastructure

  • Repairing process water, compressed air, and utility pipelines in factories.
  • Suitable for steel, GRP, asbestos cement, and PVC (with stiffeners).
  • Provides a long-term, cost-effective solution without welding.
Frequently Asked Questions

Yes, it can be installed on live pipelines?

  • EPDM → Water, wastewater.
  • NBR → Oil, fuel.
  • FKM → Chemicals, high temperature.
  • FLEX → For moderate pressure & pipe joining.
  • Full-Circle High-Strength Clamp → Permanent, high-pressure repairs.

Typically exceeds 20 years with proper installation.